A bespoke dual Kammprofile gasket is manufactured to the highest standards. A fully annealed high quality tube is prepared and laser welded to the gasket. In-process inspection is conducted. The tube end is prepared per the application and a standard tube fitting is installed. The unit undergoes visual inspection, 100% leak and pressure testing.

A certified standard RTJ is drilled to a proprietary configuration optimising metal to metal fusion. A fully annealed high quality tube is prepared and laser welded to the RTJ. In-process inspection is conducted. The tube end is prepared per the application and a standard tube fitting is installed. The unit undergoes visual inspection, 100% leak and pressure testing.

The IsoShield LP™ is an effective low pressure flange isolation kit suitable for non critical applications. The product comprises a 3mm thick glass reinforced epoxy body and a one piece Teflon seal, isolation sleeves and Alba HC washers. The product is commonly used in water and non hydrocarbon service both onshore and offshore.

The Alba IsoShield HP™ Isolation kit is part of our leak free, tight sealing corrosion control range. Commonly used for electrical isolation and corrosion control on high pressure flanges and pipes its designed to provide critical service sealing and robust and reliable flange Isolation. The IsoShield HP™is a tried and tested design with over 30 years field experience.

The Alba ISoShield FS™ has been designed with personnel safety in mind – it’s unique tight-seal technology limits hydrocarbon releases and the spread of fire. Safer and tighter, our IsoShield FS™ uses a unique combination of spring energised and pressure activated teflon seals with a kammpro phyllosillicate fire safe back up seal – the only isolation kit on the market to use this combination of seals.

The IsoShield Blue™ Isolation kit is designed to be used on non fire safe low pressure flange configurations, especially in areas where only low bolt loads are available or where there may be imperfect flange conditions. The IsoShield Blue is supplied with a 3mm thick modified PTFE gasket along with Isolation sleeves and washers and has been succesfully used in the North sea market for over 10 years.